Hello to all...
I'm new to this forum and I have a small project which I require some ideas from maybe more expert people than me. Below is what I have and what I am requesting
I need to assamble a 12/24v dc switchable jump starter from 2 gel batteries of 12v 44aH. these will be enclosed together in 1 box and I need to make the connections on the plastic box outside.
Anyone can help how I can wire this setup so when I need either 12v or 24v I won't need to disconnect and reconnect wire in series and parrallel all the time. I was thinking with a sort of switch? or is not sufficient?
Best thing is that I will only have 1 outlet connection for both voltages, but if deem impossible I will install two for both voltages.
after that setup I need to install a connection to be able to connect the battery charger and charge both batteries.
Help would be appreciated!
I'm new to this forum and I have a small project which I require some ideas from maybe more expert people than me. Below is what I have and what I am requesting
I need to assamble a 12/24v dc switchable jump starter from 2 gel batteries of 12v 44aH. these will be enclosed together in 1 box and I need to make the connections on the plastic box outside.
Anyone can help how I can wire this setup so when I need either 12v or 24v I won't need to disconnect and reconnect wire in series and parrallel all the time. I was thinking with a sort of switch? or is not sufficient?
Best thing is that I will only have 1 outlet connection for both voltages, but if deem impossible I will install two for both voltages.
after that setup I need to install a connection to be able to connect the battery charger and charge both batteries.
Help would be appreciated!