Hello Guys,
Yesterday I was trying to start my electric scooter and found it's not charging. Then I have gone on removing the battery pack and checked each parallel cell group and found group6 was only @ 1v left. I have to remove the cell group and check each cell send through the charging and discharging cycle to isolate the culprit cell.
This problem is occurring for the 4th time and I suspect my BMS for the situation. Now I'm thinking of removing the BMS altogether and do the balance charging through a Skyrc iMax B6 charger externally.
My setup is;
Battery pack - 10s 6p Li-ion
Motor - 6384 Outrunner Brushless Motor
Charging - Skyrc iMax B6 charger
Discharge Through ESC - Maytech Brushless 4.12 VESC Controller
In this scenario, I would like to know the ideal wiring diagram to achieve, balance charging as 2 separate 5s packs, and then use it as a 10s pack (without the magic smoke pls).
Please find the attached images for more info on what I'm thinking. I got the thought by seeing the APS LiPo pack which I have attached as well.
Thanks in advance for your help.
Joe
Yesterday I was trying to start my electric scooter and found it's not charging. Then I have gone on removing the battery pack and checked each parallel cell group and found group6 was only @ 1v left. I have to remove the cell group and check each cell send through the charging and discharging cycle to isolate the culprit cell.
This problem is occurring for the 4th time and I suspect my BMS for the situation. Now I'm thinking of removing the BMS altogether and do the balance charging through a Skyrc iMax B6 charger externally.
My setup is;
Battery pack - 10s 6p Li-ion
Motor - 6384 Outrunner Brushless Motor
Charging - Skyrc iMax B6 charger
Discharge Through ESC - Maytech Brushless 4.12 VESC Controller
In this scenario, I would like to know the ideal wiring diagram to achieve, balance charging as 2 separate 5s packs, and then use it as a 10s pack (without the magic smoke pls).
Please find the attached images for more info on what I'm thinking. I got the thought by seeing the APS LiPo pack which I have attached as well.
Thanks in advance for your help.
Joe
Attachments
-
108.6 KB Views: 13
-
295.7 KB Views: 13
-
Newest-Genuine-Original-SKYRC-IMAX-B6-MINI-For-RC-Helicopter-Aircraft-DIY-Drone-Battery-Chargi...jpg71.1 KB Views: 10
Last edited: