I have a Ni Cad battery Charger as part of a Black and Decker Ve3rsa pack system. They recommend a 14 Hour charge the first time you charge them. I have basically ruined one set of batteries forgetting to pull them out of the charger in a timely manner. I measured the power supply to the base it is approx. 9V AC unloaded. So I'm going to try and built this circuit before I order a new set of batterys.
I'll protoboard it first before making a final build, I'll post my results as I proceed. The signal feeding the SSR is not finalized. at this point, since I'm not sure how my SSR will handle the signal going to it.
I'll protoboard it first before making a final build, I'll post my results as I proceed. The signal feeding the SSR is not finalized. at this point, since I'm not sure how my SSR will handle the signal going to it.