Hi All,
I am using 1000 uf capacitor in this 10v to +\- 5v converter. This retains the square wave shape going into this circuit at low frequencies. but when plugging into the circuit it takes about 10 seconds to work due to the large 1000uf cap and I can see on the scope the squrewave slowly appearing going from 0 to 10v slowly down to +/- 5. Is there any way to remedy this? I had an idea maybe use lots of smaller caps that add up to 1000uf?
I am using 1000 uf capacitor in this 10v to +\- 5v converter. This retains the square wave shape going into this circuit at low frequencies. but when plugging into the circuit it takes about 10 seconds to work due to the large 1000uf cap and I can see on the scope the squrewave slowly appearing going from 0 to 10v slowly down to +/- 5. Is there any way to remedy this? I had an idea maybe use lots of smaller caps that add up to 1000uf?