usb 3.0

Hi everyone, I am looking for a hardware solution to bridge PCIe Gen3 (NVMe SSD) to a USB 3.2 Host, strictly requiring Industrial Temperature range (-40°C to +85°C). The Constraints: 1. Physical Interface: PCIe Gen3 (x2 or x4) to USB 3.2 Gen1/Gen2. 2. Operating Temp: -40°C to +85°C...

I need to know how the LED light of a USB card reader that indicates the data transfer works? Is it possible to create such a light using transistors and putting that circuit parallelly with a data cable connected to a USB storage drive? In this diagram how that LED connected with the GPIO0...

Hi, I would like to power an embedded board that has USB-C input using a power supply with 5VDC output (8A). The cable I am using does not have the USB serial port but only the two 5V and GND signals. With this configuration the board does not turn on completely: is it possible that some sort of...

Hi everyone, I'm building an USB charger with a linear PSU just for hobby and I want to install an USB 3.1 port so it can supply 900 mA max. If I only connect up the USB 3.1 port VBUS and GND pins, will the device recognize it as USB 2.0? I'd like to know what I should do with the other five...

Hi all. I'm putting together a fairly simple project, imstalling a bluetooth amp in the shell of an old boonbox to power the speakers. For power delivery, I intend to use a lithium ion powerbank capable of supplying 20v via USB-C and a USB PD spoofer. The only problem is, the powerbank also...

I've recently been design a PIC development board with USB and other peripherals, I've got the board working, got code running on the board and managed to test all of the peripherals that worked great, until it came to USB. The issue isn't the USB circuity its self, I've recently brought a new...