speakers

Amplifier: Technics/Panasonic SU-CH7 This amplifier belongs to an Hi-Fi Audio system (SC-CH7) that originally comes with speakers (speakers with separate highs and lows too, 4 connections in each speaker). It also needed the Tuner unit (ST-CH7L) in order to turn the amplifier on but I was able...

Today a friend of mine gave me two old mono speakers with two separate 2,5mm mono jacks that i think connect as L and R to an amp. He asked me if its possible to connect them together to an 2,5mm stereo jack to make them play music from his smartphone, i searched the internet to find if that's...

So I am currently trying to build a multi-platform portable. I'm using a raspberry pi zero w. I have a USB speaker with its own audio card inside. I am attempting to use a potentiometer to allow volume adjustment. With the soldering points on this speaker board, I am unsure what to attach to the...

Hello! I recently built a scale model of the Jurassic Park Entrance gates but when I was getting ready to finally be done with it I had the thought I could add a servo or two in order to make the doors automatic. In researching this I decided, well, why don't I add a soundboard and some mini...

Hello Everyone this is my first post... I have the Mackie CR4 audio monitors, and I see the PCB is kind of burned (images attached). I do believe the Z3 and Z4 zenners were overheated but I'm not really sure. I don't know the part numbers for those or if I'm missing something, I would...

Hello i am thinking of making a Bluetooth sound bar out of my old laptop lenovo laptop ( ideapad 510) internal speakers, from the internet i learnt that you need to change the digital signal to analog and then amplify the signal before connecting it to the speaker. I am a little worried about...

Hello guys. This is my first post. I recently got these speakers for free, and right away i notices the speakers have no output sound at all, completely silent. First thing i did was a inspection of the board, which looked perfectly fine. After i plugged the original adapter i hear a small pop...

I have a deep cycle battery in my camper. Powering my TV from it. is no problem however there is no sound. When I switch on the engine the oscillator churns more voltage into the battery and then the TV speakers work. After turning off the ignition there is sound for a short amount of time...

EDIT FOR THE TITLE: It should be "that carry the audio from the jack" rather than "to the jack" as the device delivers the audio over the jack and wires to the speakers. Recently, one of the wires connected to the audio jack of my speakers cut off directly next to it (due to bending and...