Hi, I need some help for rescaling 0-10VDC to 10-0VDC modulating signal. for example: input 0VDC =Output 10VDC, 1VDC=9 VDC, 2VDC=8VDC...... 9VDC=1 VDC, 10VDC=0 VDC.
Could anyone help me to build a circuit for this? I can provide 24VAC or DC from external source.
Hello! So the other night me and my wife had gotten a tread mill (Nordic trac elite 3700) off of Facebook marketplace for $50 and I tilted the walking track upwards last night and for some reason the incline motor decided to continuously lower itself.
It appears it Endlessly increased its draw...
Hello, I need some help connecting an 8 pin current mode PWM controller to my boost converter circuit. Specifically this one. I have used controller IC's with integrated switches to make boost converters before, however, the amount of power I need to run through the circuit requires an external...
I have solved my question like that successfully with mesh analysis which the question wanted from me.
But I am just curious that how can I calculate this circuit using nodal analysis?
Here is my calculation:
and here is the question of the circuit:
I don't want the whole solution. I...
My mesh current equations:
- 300*i1 + 500(i1 - i2) + 600*i1 = 0
- 200*i2 -25 + 13 + 500(i2 - i1) = 0
Since i1 is 25mA i2 can be found easily. However, equation 1 will yield 70mA while equation 2 will give 35mA for i2.
What am I missing here?
I would be very grateful if someone can point out...
I have a device that runs on -5v DC but I only have 120V AC. I need to build a power supply that can convert 120v AC to -5v DC. I need to draw the best power supple and indicate the wave form at each stage.