hi ...... friends i am a new
I have the same problem but I did not understand what to do.
Please help and give me the steps he has done. Thank you

 

photo for my power supply

 

Hello,

Please upload the photos to the forum, as they do not show.
You can do that using the "Upload a File" button below the reply box.

Bertus

 

MY PHOTO

 

Hello,

The part shown in the video and you are pointing at is the bridge rectfier.
As you can see the pins are not symetrical on the part.
Also the part has a dent on one of the edges for orientation.

Bertus

 

YOU CAN HELP ME TO REPAIR MY PARTS A SCHEME OR A PLAN PLZ

Hello,

The part shown in the video and you are pointing at is the bridge rectfier.
As you can see the pins are not symetrical on the part.
Also the part has a dent on one of the edges for orientation.

Bertus

 

Hello,

The part shown in the video and you are pointing at is the bridge rectfier.
As you can see the pins are not symetrical on the part.
Also the part has a dent on one of the edges for orientation.

Bertus

Help me plz

 

hi ...... friends i am a new
I have the same problem but I did not understand what to do.
Please help and give me the steps he has done. Thank you
my mail

Help me plz

my mail : - <SNIP>

Moderators note : removed email to avoid spam