Hi,
I've built a device that utilizes 2 DC push solenoids, and an AC cooling fan. I'm powering the solenoids with a variable bench power supply set at 30V DC (they're drawing about 25V, and 2-3A). I need the first solenoid to be activated approximately 60-120 times, at a rate of two cycles per second, and then both solenoids need to be activated simultaneously approximately 60 times, while the fan runs continuously. Assuming that I know little or nothing about electronics, can you suggest a simple, dependable, control set up? Of course the lower the cost, the better for keeping production costs down.
Thanks,
Marimbob
I've built a device that utilizes 2 DC push solenoids, and an AC cooling fan. I'm powering the solenoids with a variable bench power supply set at 30V DC (they're drawing about 25V, and 2-3A). I need the first solenoid to be activated approximately 60-120 times, at a rate of two cycles per second, and then both solenoids need to be activated simultaneously approximately 60 times, while the fan runs continuously. Assuming that I know little or nothing about electronics, can you suggest a simple, dependable, control set up? Of course the lower the cost, the better for keeping production costs down.
Thanks,
Marimbob