A circuit with DC voltage of 5 V with an output resistance of 0.1 MΩ. What voltage do you measure when you
using a digital multimeter APPA62 having 10 MΩ input impedance? If the defect is small or large in relation to the error specified in the instrument's specification? See attached APPA62 electrical specifications.
When using APPA62 to measure the output resistance, I assume the ciruit will be like a DC volage U=5V connected with two parallel resisitor R1=0.1MΩ and R2=10MΩ. So I just have to calculate the voltage over R2 which is the value the multimeter will be showing?
Before I start to attempt to calculate, am I thinking this right?
using a digital multimeter APPA62 having 10 MΩ input impedance? If the defect is small or large in relation to the error specified in the instrument's specification? See attached APPA62 electrical specifications.
When using APPA62 to measure the output resistance, I assume the ciruit will be like a DC volage U=5V connected with two parallel resisitor R1=0.1MΩ and R2=10MΩ. So I just have to calculate the voltage over R2 which is the value the multimeter will be showing?
Before I start to attempt to calculate, am I thinking this right?
Attachments
-
74.8 KB Views: 16