Hello Everyone!
I am a novice and inspiring engineer today I have come across a problem with the Arduino serial monitor/ my code. The problem I am encountering is: when moving the analog stick the serial monitor is supposed to print the movement and make the attached motors spin in that specified direction (ex: analog stick goes up the motors go forward) and it does neither of those things. When I open the serial monitor it displays "ps4 Bluetooth library open" or something along those lines (I don't currently have the IDE open).
I use an Arduino Mega 2560
- usb host shield:
https://www.amazon.com/LM-YN-Arduin...cs&sprefix=usb+host+sh,electronics,244&sr=1-2
-Usb adapter:
https://www.walmart.com/ip/EEEkit-8...UnhA9KsbhcMtwpVLdWw7B9-BxFStdhLBoCnaYQAvD_BwE
here is the link to the project I am trying to replicate:
https://maker.pro/arduino/projects/how-to-control-an-arduino-robot-with-a-ps4-bluetooth-controller
A screenshot of what my screen looks like for further context:
I made sure I was using the right port selected that I was using a MEGA. If any more information is needed just let me know and Thank you!
I am a novice and inspiring engineer today I have come across a problem with the Arduino serial monitor/ my code. The problem I am encountering is: when moving the analog stick the serial monitor is supposed to print the movement and make the attached motors spin in that specified direction (ex: analog stick goes up the motors go forward) and it does neither of those things. When I open the serial monitor it displays "ps4 Bluetooth library open" or something along those lines (I don't currently have the IDE open).
I use an Arduino Mega 2560
- usb host shield:
https://www.amazon.com/LM-YN-Arduin...cs&sprefix=usb+host+sh,electronics,244&sr=1-2
-Usb adapter:
https://www.walmart.com/ip/EEEkit-8...UnhA9KsbhcMtwpVLdWw7B9-BxFStdhLBoCnaYQAvD_BwE
here is the link to the project I am trying to replicate:
https://maker.pro/arduino/projects/how-to-control-an-arduino-robot-with-a-ps4-bluetooth-controller
A screenshot of what my screen looks like for further context:
I made sure I was using the right port selected that I was using a MEGA. If any more information is needed just let me know and Thank you!