What is the problem with this display, I am using the STM32F7508-DK With 800x480 Display but I am getting artifacts when using the transition function in touch gfx
I am using TST070CBOT-01P Along with STM32F7508-DK using RGB Interface , I have wired the jumpers with the display to the corresponding pins and everything works fine in static mode, But when transition begins then the Display shows artifacts as shown in video.
Interface- RGB 24 bits
MCU - 200 MHZ
TFT Clock- 30 MHZ
I am using TST070CBOT-01P Along with STM32F7508-DK using RGB Interface , I have wired the jumpers with the display to the corresponding pins and everything works fine in static mode, But when transition begins then the Display shows artifacts as shown in video.
Interface- RGB 24 bits
MCU - 200 MHZ
TFT Clock- 30 MHZ