STM32F4 Difference between single conversion mode and discontinuous mode.

Thread Starter

tuko maliba

Joined Jul 9, 2016
4
Hey,

What is difference between single conversion mode and discontinuous mode if in discontinuous mode set just 1 conversion.
 

thumb2

Joined Oct 4, 2015
122
Hi, could you specify de MCU part number or link the data sheet so we can take a look at the specifications ?
 

thumb2

Joined Oct 4, 2015
122
As explained in the reference manual, in continuous mode the EOC flag is set after all conversions are made (so the ADC convert the analog signal from each channel). In discontinuous mode the ADC the EOC flag is set after the analog signal from each group of channels is converted (see example in 13.3.10).
 
Top