I am organizing a research team of amateur researchers in order to uncover the secrets of Stanly Meiyers V1C 6-1 , so far we are 5 people working on this and will be communicating our findings and methodolgy . This has never been done by anybody yet . We are looking for more qualified people who wish to work with us in order to solve Meyers once and for all .

These are some interresting videos about the V1C coil , you may also read more about it in the briefing.

http://www.youtube.com/watch?v=X6hJEmw3mes
http://www.youtube.com/watch?v=hSlF7khibs0


Tools necessary for this adventure : Stainless steel 430FR wire , 28-32 AWG magnet wire , 40-44 awg magnet wire , delrin bobbin material , ferrite core 1/4 to 1/2 ferrite core or electrical steel core , High precision scale . Basic tools . The coil itself will be small , about 630 feet per choke , time 2 , so 1260 feet per VIC coil . It will be quickly made since 430-FR wire has 18.8 ohms per foot .

I will be providing the stainless steel wire for the experiment since I made a big order of this . I payed 3000$ for this wire and it took 6 months to make .

http://waterfuelcell.org/phpBB2/viewtopic.php?t=1185

Read this quote if you wanna know my take on this , I believe it has to do with single wire transmission and scalar potential

http://www.energeticforum.com/renewable-energy/3240-real-injector-vic-coil-6-1-a.html#post36042

So if you wish to join the team and work on the most promising project in history pm me .

 

Meiyer was a scam artist. You seem to be phishing for names. This is off to a bad start. The so-called voltage intensifier circuit is a simple 1:3 step up transformer. The "chokes" accompanying it make no sense electronically. The water molecule has a resonance in the near infra-red, so junk electronics or stainless steel will never have any such effect.

The links below are a representative but not exhaustive list of the discussions we have had to recent date about electrolysis for use in increasing mileage. While the list is not complete, I would think that the subject has been dealt with to exhaustion. This subject is not likely to open up again until someone has some concrete results to show.

Please take the time to read through these threads. You will have a much better idea of what is likely/possible to do. If our various responses seem discouraging, consider that we do have a great deal of experience in the area of electronics. We have a pretty good idea of what is possible.

Please note that we are willing to help build and refine circuits for such purpose, while remaining sceptical about the ultimate outcome. We are here to help spread knowledge around, not to protect against progress that will cost oil interests' money.

From some recent readings, though, I am going to put Stanly Meiyer in the category of complete scam artist. His work contains no merit whatever. His ideas are simply to separate you from your money. The sites that keep his stuff available do so only to cash in on his bogus devices. Meiyer was never able to demonstrate a working device - that he said so is an entirely different matter. His principles have no basis in reality.

Further, as I relate in one thread, it appears as if Meiyer's work has been deliberately misrepresented. Reading his patent #4,936,961 and another international patent WO 92/07861, we find his original circuitry and operating conditions. The obvious fraudalent nature of his stuff in made clear by his failure to label parts or supply values for them in the schematics.

Later circuits attributed to Meiyer show blocks of circuitry that in no way resemble the patent circuits. They do, however, resemble hobby circuits. They use IC's that were long obsolete by the publication date, and which are not suited to the functions that Meyer insists must be carried out. HIs work would seem to have been hijacked by later-date scam artists, who wish to make the circuitry more believable.

One fun fact - we keep seeing claims for very high voltages needed in the electrolysis cell. Meiyer states very clearly in his patent #4,936,961 that he obtained results with 78 volts across the plates. Don't be led down the path by people who aren't even familiar with the original work.

Please remember that any device that promises an output greater than the input is quite extraordinary. Extraordinary claims require extraordinary proof. To date, we have claims, but not one bit of proof. We will not function as a sounding board for you to advance your beliefs.


http://forum.allaboutcircuits.com/showthread.php?t=14396

http://forum.allaboutcircuits.com/showthread.php?t=14535

http://forum.allaboutcircuits.com/showthread.php?t=14064

http://forum.allaboutcircuits.com/showthread.php?t=11879

http://forum.allaboutcircuits.com/showthread.php?t=13206

http://forum.allaboutcircuits.com/showthread.php?t=15539

http://forum.allaboutcircuits.com/showthread.php?t=14794

http://forum.allaboutcircuits.com/showthread.php?t=14933

http://forum.allaboutcircuits.com/showthread.php?t=13207

http://forum.allaboutcircuits.com/showthread.php?t=15043

http://forum.allaboutcircuits.com/showthread.php?t=15713

http://forum.allaboutcircuits.com/showthread.php?t=15859

http://forum.allaboutcircuits.com/showthread.php?t=12711

http://forum.allaboutcircuits.com/showthread.php?t=16792

http://forum.allaboutcircuits.com/showthread.php?t=12643

 

Plz , I dont feel like arguing over this , after hearing his brothers radio interview I have no doubt the man was for real . Stan is dead now , really dead .

The man was for real 100% , just look at the body language from the videos , the guy is not lying ...

Anyways I dont feel like over this , things are bad now with the recession and stuff , I believe we should investigate further into this .

 

That is your problem.