Since I tinker, I have accumulated various electronic parts. I have used the compartment type cases and the drawer type in the past. I was looking for an alternative approach allowing easier management and quicker visual access. Somewhere along the line, I decided to try old plastic audio cassette tape covers to separate and store parts, which I then put in larger plastic chest of drawers. Used paper tape and self sticking labels, and conductive /anti-static foam in the case bottom.
As I recall, I bought bulk clear polybox from sleevecityusa and foam from amazon sellers, but of course, these are available elsewhere.
As I recall, I bought bulk clear polybox from sleevecityusa and foam from amazon sellers, but of course, these are available elsewhere.
Attachments
-
1.1 MB Views: 47
-
907.2 KB Views: 49