I need help sizing a 24V power supply for a gear motor that will drive an aquarium pump: http://www.ebay.com/itm/Pittman-GM9...-MOTOR-Cole-Parmer-Pump-7016-20-/272279426398
The current specs for the motor are as follows:
Current @ Continuous Torque: 1.82 A
No-Load Current: .16 A
Peek Current: 9.64 A
The detailed spec sheet is at: http://www.pittman-motors.com/Brush-DC-Motors/9236-Brush-DC-Motor.aspx
If the above information is insufficient to answer my question please let me know what data you need, I have the pump in hand and can hook it up and test as needed.
Thanks in advance,
Tom
The current specs for the motor are as follows:
Current @ Continuous Torque: 1.82 A
No-Load Current: .16 A
Peek Current: 9.64 A
The detailed spec sheet is at: http://www.pittman-motors.com/Brush-DC-Motors/9236-Brush-DC-Motor.aspx
If the above information is insufficient to answer my question please let me know what data you need, I have the pump in hand and can hook it up and test as needed.
Thanks in advance,
Tom