Hi guys, currently doing a lab just now for a single phase transformer. i'm getting along fine with it however there is one question holding me back and it is as follows:
Compare and comment on the measured transformer secondary voltage considering the rating of the transformer.(i'll put details of transformer etc at bottom)
Now this is in the open circuit test section bit of the lab....
Transformer
1.Rating= 750 VA
2.Frequency = 50 Hz
Test: 10 11 12 13
Primary Voltage: 180 200 220 230
secondary voltage:54 60 66 68
Turn Ratio: 3.3 3.3 3.3 3.82
Compare and comment on the measured transformer secondary voltage considering the rating of the transformer.(i'll put details of transformer etc at bottom)
Now this is in the open circuit test section bit of the lab....
Transformer
1.Rating= 750 VA
2.Frequency = 50 Hz
Test: 10 11 12 13
Primary Voltage: 180 200 220 230
secondary voltage:54 60 66 68
Turn Ratio: 3.3 3.3 3.3 3.82