I have a problem I'm really hoping someone can assist with. I have an Arduno uno connected to an external mp3 module
http://www.mdfly.com/products/sd-card-mp3-player-module-rs232-ttl.html
I have all of the wires correctly connected
I'm trying to get a lone .mp3 file on the SD card called (001.mp3) to play via the below sketch. This sketch appears to be as simple as it gets
void setup(){
Serial.begin(4800);
Serial.write(0x01);
}
void loop(){
}
I have also tried Serial.write ("001.mp3") to no avail. It's not the SD card as I've tried several and they all do the same thing.
Any help is greatly appreciated.[/code]
http://www.mdfly.com/products/sd-card-mp3-player-module-rs232-ttl.html
I have all of the wires correctly connected
I'm trying to get a lone .mp3 file on the SD card called (001.mp3) to play via the below sketch. This sketch appears to be as simple as it gets
void setup(){
Serial.begin(4800);
Serial.write(0x01);
}
void loop(){
}
I have also tried Serial.write ("001.mp3") to no avail. It's not the SD card as I've tried several and they all do the same thing.
Any help is greatly appreciated.[/code]