Hello all, I unfortunately am stuck on the same boot screen with my SDS 1052DL+, I've tried the 'math' button trick and trying to update the firmware with a usb drive. If anyone has a fix I would appreciate the help,

Thanks!

Mod: link to old thread.
https://forum.allaboutcircuits.com/threads/siglent-sds1052dl-fails-boot.191715/post-1998262

 

Many recovery packages for Siglent instruments are now available online:
https://siglent.tawk.help/article/instrument-stuck-at-boot-screen-recovery

 

Many recovery packages for Siglent instruments are now available online:
https://siglent.tawk.help/article/instrument-stuck-at-boot-screen-recovery

Hi tautech, I have tried the fat32 formatted 2GB thumb drive with the recovery files for the SDS1052DL+. I put the three files (datafs.img, ro_ulmage and rootfs.img) on a empty drive, insert into the front panel of the scope, boot up and wait 10 minutes. No change in state.

Thanks for any other advice you can offer.

 

Hi tautech, I have tried the fat32 formatted 2GB thumb drive with the recovery files for the SDS1052DL+. I put the three files (datafs.img, ro_ulmage and rootfs.img) on a empty drive, insert into the front panel of the scope, boot up and wait 10 minutes. No change in state.

Thanks for any other advice you can offer.

Try other USB sticks.....not all play well with USB recovery.