Hi, I've been trying to find information on how to trigger a servo so that it activates and moves in one direction, then automatically returns to its "home" position (this must be accomplished within a specified time)...I've spent hours researching and can't find a relatively simple & cost-effective solution.
I'd be grateful for any assistance, and have attached a photo for reference.

 

Use an arduino or a cheaper clone, there are servo libraries and examples available for download so your input would be minimal.

https://www.arduino.cc/en/Reference/Servo

 

Use an arduino or a cheaper clone, there are servo libraries and examples available for download so your input would be minimal.

https://www.arduino.cc/en/Reference/Servo

Thank you, I'll look into that!