hi
if i have a supply of 460vac with three resistors (250Ω, 100Ω, and 40Ω) of different values but same power rating say 300W.
I would like to connect them in series or parallel so that each resistor is used at maximum power rating.
if i connect them in series, the lower resistors is not going to be used at max power : following P=I^2R.
please help me with this
if i have a supply of 460vac with three resistors (250Ω, 100Ω, and 40Ω) of different values but same power rating say 300W.
I would like to connect them in series or parallel so that each resistor is used at maximum power rating.
if i connect them in series, the lower resistors is not going to be used at max power : following P=I^2R.
please help me with this