Serial Port BLE Module (Master/Slave) : HM-10 replacement

Thread Starter

Ally Cat

Joined Mar 28, 2016
78
I am trying to mount a Bluetooth module on a PCB. I found a BLUENRG-M2SA on a digikey page and it looks like a replacement. I don't know allot about Blue tooth so I want to be sure I am hooking it up right. I only supplied power and hook up a spi with and interrupt. I plan on mounting this on a pcb. I know Cubemx can help me with the firmware so I used an Stmicrolectrinc MCU and Blue tooth Module.
 

Attachments

Top