I was wondering if there is a way to scale ESR values from a datasheet for frequency?
I am using a 680uF Cap at 20kHz and the datasheet claims a maximum ESR of 0.366Ohm at 120Hz.
It is the 687LBB200M2EC from Illinois Capacitor:
http://www.illinoiscapacitor.com/ic_search/seriesDocuments/LBB series.pdf
Thanks.
I am using a 680uF Cap at 20kHz and the datasheet claims a maximum ESR of 0.366Ohm at 120Hz.
It is the 687LBB200M2EC from Illinois Capacitor:
http://www.illinoiscapacitor.com/ic_search/seriesDocuments/LBB series.pdf
Thanks.