W Thread Starter Willies Joined Feb 11, 2014 2 Apr 8, 2021 #1 Can anyone help. I have set up my access control and it seemed to work ok for a short time Here is my wiring,
Can anyone help. I have set up my access control and it seemed to work ok for a short time Here is my wiring,
Dodgydave Joined Jun 22, 2012 10,050 Apr 13, 2021 #2 Yes you are shorting out the + 12v to gnd via the relay NC terminals. One side of the mag lock should be connected to gnd not +12V.
Yes you are shorting out the + 12v to gnd via the relay NC terminals. One side of the mag lock should be connected to gnd not +12V.
W Thread Starter Willies Joined Feb 11, 2014 2 Apr 14, 2021 #3 Thanks for this and will look at that Thanks again.
