Hi
I am having an attempt at repairing a Computer 600W PSU, a sort of exercise to see if I can.
First is I am trying to id as many the components on the board as possible before I start to test , not really sure which ones would be best to test first , as I would have to de-solder each one to test , or could I test any that are attached ! .
Anyway some are fairly easy to id, but some not so, to start there is a, what looks like a resistor of some sort, the markings from what I can see are “5° C V1” it is sleeved ! , underneath on the PCB one of the pins is marked “Ropp” !
I am having an attempt at repairing a Computer 600W PSU, a sort of exercise to see if I can.
First is I am trying to id as many the components on the board as possible before I start to test , not really sure which ones would be best to test first , as I would have to de-solder each one to test , or could I test any that are attached ! .
Anyway some are fairly easy to id, but some not so, to start there is a, what looks like a resistor of some sort, the markings from what I can see are “5° C V1” it is sleeved ! , underneath on the PCB one of the pins is marked “Ropp” !
Attachments
-
446.9 KB Views: 25
-
1,015.2 KB Views: 25
-
5.3 MB Views: 24
-
2.8 MB Views: 23