Hey guys, i have an ambitious idea. I have an old Honda control module that i pulled out my car and replaced with a new one. in a electrical test probing pin 14 and 15 at the connector (see pic), it gave me super high resistance, out of range of the spec. so i had to replace the Ecm or the wiring. went the Ecm route, problem went away. My question is, with the problem being the computer, does anyone know or have an idea of the component(s) that went bad on the board, or is it possible to find the bad parts with a board schematic. Ive seen people on youtube actually fix honda boards so i know its possible.
