Hi all,
Im using two ADC signals input to limit the PWM value, in the 12F1501.
ADC signal1 inputs to RA0, ADC signal2 inputs to RA1, PWM output from RA2.
I got stuck with this error message after compiled: Not enough parameters 12F1501-PWM.c pointing to this command: PWM_Init1(500000);
Please any advice?
Im using two ADC signals input to limit the PWM value, in the 12F1501.
ADC signal1 inputs to RA0, ADC signal2 inputs to RA1, PWM output from RA2.
I got stuck with this error message after compiled: Not enough parameters 12F1501-PWM.c pointing to this command: PWM_Init1(500000);
Please any advice?
Attachments
-
28.2 KB Views: 126
-
2.9 MB Views: 18