I tried uploading some images and including some code and the forum keeps crashing on me so is there any restrictions on text or images that can be posted?

 

here is the text of my post

Hi everyone, Im trying to make a digital circuit that receives a signal for a certain button, and then outputs in Binary coded decimal. I've tried simulating the circuit on ISP lever and got the following error messages:

Instantiating primitives...
Linking 'C:\ispLEVER_Classic1_6\ispcpld\lib5\g_2or.bl1'
Linking 'C:\ispLEVER_Classic1_6\ispcpld\lib5\g_input.bl1'
Linking 'C:\ispLEVER_Classic1_6\ispcpld\lib5\g_inv.bl1'
Linking 'C:\ispLEVER_Classic1_6\ispcpld\lib5\g_output.bl1'
Logical Error 3509: Output 'd' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'a' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'b' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'c' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'd' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'a' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'b' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'c' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'd' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'a' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'b' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'c' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'd' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'a' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'b' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'c' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'd' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'a' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'b' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'
Logical Error 3509: Output 'c' in upper-level source 'studentidtobcd' can't be redriven to functional_block 'g_output'

BLIFLINK complete. Error: 20. Warning: 0. Time: 1 second

Done: failed with exit code: 0001.


Im trying to attach images of the circuit and attempted simulation but the forum is preventing me from doing so. Ill see if I can upload it online and post the link here...

 

this seems to be the only section i can post a thread in

 

Try to reduce your thread title to less than 30 character and tell us if that solves your problem.

 

I have been trying to post a new thread for a few days now without success. I can, however, post a reply. I have attempted to email support. I'm not sure if it's getting through. I have received no response. Thank you.

 

I have received no IT mail. Where were you trying to send it?

This is a known bug with unknown origins.

Try to reduce your thread title to 30 characters or less. A moderator has the ability to change it in the future.
Tell us if that approach was successful.

Keep in mind that any new thread in The Completed Projects Collection has to go through moderation before it is visible to the public.

And remember to tell us if it worked!

 

I have received no IT mail. Where were you trying to send it?

I clicked 'Contact Us' at the bottom of the page. Selected 'General Forum Problems' Filled out the message and related information and clicked 'Send'. I used the service twice in the past few days.

This is a known bug with unknown origins.

Try to reduce your thread title to 30 characters or less. A moderator has the ability to change it in the future.
Tell us if that approach was successful.

Keep in mind that any new thread in The Completed Projects Collection has to go through moderation before it is visible to the public.

And remember to tell us if it worked!

That worked for me. Thank you.

 

I 'm 99% sure that this contact for reaches the admins, who don't have the time to tend to those problems. For any problem you encounter try to post it here, in the Feedback, or if this is impossible, PM a moderator.

 

I am also having problems creating new thread. Whenever I try to post the thread I want to create here (http://forum.allaboutcircuits.com/forumdisplay.php?f=6), an error always occur.

Server error
The website encountered an error while retrieving http://forum.allaboutcircuits.com/newthread.php?do=postthread&f=6. It may be down for maintenance or configured incorrectly.
Here are some suggestions:
Reload this webpage later.
HTTP Error 500 (Internal Server Error): An unexpected condition was encountered while the server was attempting to fulfill the request.

I believe this has nothing to do with the post moderation.

I've tried reloading the page already. I even attempted to create the thread multiple times. But no luck.

 

Did you try applying the suggestion in post #6? How did that work out for you?

Try to go as low as below 20 characters.

 

I can't create any new threads. 500 Server Error.

 

Yup, reducing title length fixed it. Now the title is not descriptive at all.

 

We can change the title in retrospect. What would you like your title changed into?