Power vs Current/Voltage in Speakers!

Status
Not open for further replies.

Ramussons

Joined May 3, 2013
1,572
Hello everyone,

I have been wondering about the reason why speakers are rated using watts rather than amps ?

Why is it that voltage is necessary when speaking about speakers for example? Why can't we just use current to rate a speaker ?

I mean, if current is what generates the magnetic field that moves the speakers, why does voltage even matter here?

I am confused about this! Speakers are just one example. Light bulbs are also rated using watts rather than current.

Could anyone please shed some light on the reasons behind this?

In the case of speakers, how is the energy converted into magnetic fields, and then further how is it transferred into air waves ?

Thanks a lot, I know this is a very good question
Its a nomenclature from the old times. Electrical "goods" had a rating to make one "understand" its output.

A 30 W speaker could "sound" louder than a 15 W one. (How much louder :eek:)
A 60 W bulb gave more light than a 40 W bulb. (How much brighter o_O)
A 15 HP motor is more powerful than a 30 HP motor ( That I know is roughly twice :D)
..and so on.
 

MrSoftware

Joined Oct 29, 2013
2,280
Understand 2 things. First the power rating typically refers to how much heat energy the speaker can dissipate without melting down, it does not refer to the mechanical power capacity. Second speakers come in many different designs, which leads to different impedances. 10A through an 8-ohm speaker is much more power (and much more heat) than 10A through a 2-ohm speaker. But 100 watts is 100 watts, no matter if it's 1A @100-ohm, or 10A @1-ohm.

The enclosure design can dramatically affect the actual power that a speaker can take without physically falling apart, especially at lower frequencies. But that's a whole different discussion.
 
Status
Not open for further replies.
Top