Hello,
Here is my problem.
I have ...
power supply A at the 4 pin molex plug with no load I have 5.13 vdc and 11.66 vdc with a hd load I have 4.9 vdc and 11.5 vdc
power supply B at the 4 pin molex plug with no load I have 5.03 vdc and 12.18 vdc with a hd load I have 4.5 vdc and 12.9 vdc
For some reason which is evading me the pc will boot to the hd when using power supply A but not when using power supply B
I am not an expert and the only explanation I can come up with is the drop of the 5 vdc pin to 4.5 vdc on power supply B is not providing enough voltage to run the hd.
Am I correct in this line of thinking or is there another explanation?
Here is my problem.
I have ...
power supply A at the 4 pin molex plug with no load I have 5.13 vdc and 11.66 vdc with a hd load I have 4.9 vdc and 11.5 vdc
power supply B at the 4 pin molex plug with no load I have 5.03 vdc and 12.18 vdc with a hd load I have 4.5 vdc and 12.9 vdc
For some reason which is evading me the pc will boot to the hd when using power supply A but not when using power supply B
I am not an expert and the only explanation I can come up with is the drop of the 5 vdc pin to 4.5 vdc on power supply B is not providing enough voltage to run the hd.
Am I correct in this line of thinking or is there another explanation?