Hi Max,
I think the TS said at one point that the distance between the sensor and the reject point was 1.2 metres. In post #93 I made a mistake. I read the value to pre load the counter for one of the TS's requested count values. So if we use the count value of 16500 (Quoted in post #97 ) then one count = 1200mm /16500 = 0.073mm.
Les.
I think the TS said at one point that the distance between the sensor and the reject point was 1.2 metres. In post #93 I made a mistake. I read the value to pre load the counter for one of the TS's requested count values. So if we use the count value of 16500 (Quoted in post #97 ) then one count = 1200mm /16500 = 0.073mm.
Les.