Hello all,
When programming in PBasic for a BS2 micro-controller, how do you make (or is it possible) I/O pins source or sink things while the rest of the program is running? Any help would be greatly appreciated.
Thanks,
mpuvdd
There should be a data sheet about the BS2 that describes how to alter the individual pins for I/O. As any BASIC can deal with PEEK and POKE functoons, there should be little trouble with writing code to change any pin from an input to an output. The ampont of current any individual pin can source/sink is likely to be pretty small, though. Again, the data sheet tells all.