I have three 12V deep cycle/marine 24 size batteries; they have never been used in parallel. All have been recently charged and allowed 48 hours (or more) for the surface charge to dissipate.
With no load, A is at 12.87V, B is at 12.95V, and C is at 12.53V. I ordered and received the necessary 2/0 cables to place them in parallel, but I don't know if I should just connect them together, or is there something more complicated required?
Thanks.
With no load, A is at 12.87V, B is at 12.95V, and C is at 12.53V. I ordered and received the necessary 2/0 cables to place them in parallel, but I don't know if I should just connect them together, or is there something more complicated required?
Thanks.