plz explain in simple n few words the concept of optical fibres in connection with total internal reflection.

 

How is the "Index of refraction of material through Prism" determined by the relation :

nm = [Sin (A+Dm)/2]
--------------
[Sin (A/2)]

 

Why Dm i.e., minimum angle of deviation is taken here why not <D.

 

At the boundry between two materials (glass and air) a beam of light can do one of two things. It can be reflected at the boundry with the angle of reflection equal to the angle of incidence. It can also pass through the boundry and be refracted (bent) as it does so.

In total internal reflection the amount of light which escapes from the fiber is idealy zero.

 

Are these schoolwork questions? If so, we can move this thread to the appropriate forum. If they're just musings or such, please ignore my post.

 

you can see informations about fiber optic in this linkhttp://electronics.howstuffworks.com/telecomm

 

you can see informations about fiber optic in this linkhttp://electronics.howstuffworks.com/telecomm

404, dude!

 

Optical fibiers are just dielectric waveguides. Since the intrinsic impedance of the medium (the fiber) is higher than that of air, total internal reflection confines the wave (ie light) in the fiber. Outside of the fiber evenescent waves propagate, giving an exponentially decaying solution that is determined from the boundry conditions.

 

At least until you kink that sucker real good!

 

404, dude!

dear waht do u mean about "404 dude"?????

 

the correct link about how fiber optic workshttp://electronics.howstuffworks.com/question402.htm

 

dear waht do u mean about "404 dude"?????

HTTP 404 error

Dave

 

The link produces a 404 error (document does not exist)..

 

optical fibers are jus wave guides, basically they have a core (the actual guide) and a cladding surrounding it, the fiber uses Total Internal Reflection (TIR) as its principle for transmission of the intensity, TIR will occur if the refractive index of the cladding is lower than the core, the angle of incidence is greater than the critical angle (minimun angle below which TIR will not occur), and the incident intensity must be well with in the acceptance cone of the fibre. when these parameters are met TIR occurs and the wave is propogated through.