Op Amp

Status
Not open for further replies.

Dave

Joined Nov 17, 2003
6,969
Save the circuit to your PC as a JPEG. When you go to post a reply scoll down and you will see a Manage Attachments button - click this and you will see the manage attachments management window. From there you can upload images from your PC. To add them to your posts, you can use the paper-clip icon on the post reply toolbar.

I suggest you start a new thread to prevent people skimming over this thread due to the OP.

Dave
 

Dave

Joined Nov 17, 2003
6,969
CAN you explain how to Save the circuit to MY PC as a JPEG. tahnks
Given that I don't know what circuit software you are using, I would suggest the easiest way would be to do a print screen and copy to MS Paint (or other equivalent imaging programme). Then go to Save As.. and change the type to JPEG (extension JPG).

If your software has an in-built screen-dump facility I would recommend you use that.

Dave
 
Status
Not open for further replies.
Top