nt1065_USB3 gnss receiver

Thread Starter

HAMADA2YOU

Joined Mar 11, 2022
10
hello
I really need some help with the nt1065_USB3 GNSS receiver made by ntlabs, I have used active antenna as an RF input unfortunately still can not see any signal and used only for L1 band (active antenna : https://www.gnss.store/rf-gps-anten...d-gnss-active-quad-helix-antenna-for-rtk.html ).
if anyone used ntlab1065_usb3 receiver I would appreciate the help, cause their support is very slow in responding.
thanks in advance.
 
Top