I have a 555 timer setup.
Just a simple clock.
Pin Layout is:
8 to VC+
1 to VC-
2 to 6
2 to 1000uf Cap to Ground
2 to 1K pot to 7
7 to 1k Pot to VC+
A Very basic Pinout for a 555 Based Clock.
Lets assume VC+ of 5v
The 555 Output varies depending on potentiometer configuration, but never outputs higher than 3V
I need it to output as close to 5V as I can get it to.
How can I amplify the output signal to have 2V higher output?
Just a simple clock.
Pin Layout is:
8 to VC+
1 to VC-
2 to 6
2 to 1000uf Cap to Ground
2 to 1K pot to 7
7 to 1k Pot to VC+
A Very basic Pinout for a 555 Based Clock.
Lets assume VC+ of 5v
The 555 Output varies depending on potentiometer configuration, but never outputs higher than 3V
I need it to output as close to 5V as I can get it to.
How can I amplify the output signal to have 2V higher output?