Need help identifying.


Joined Jan 27, 2019
Tried to search for this, but un successful. need a little help. Thanks
That’s a surface mount inductor and the A1 is probably just a “house marking” to distinguish it for production. You would have to desolder it (or another like it) from the board and measure it directly to know the value.

Thread Starter


Joined Feb 6, 2024
You need to remove the component from the board and measure both resistance and inductance, not capacitance.
I got an LCR Meter I read 12.4 on it under the 200UH setting the others only read 1. Oh and 4ohms resistance
Last edited: