Hi there,
I am hopping someone can help me with figuring out if this is a real issues or not "1006 : Superseding current maximum RAM and RAM map.". This is what I see after I compile and when I double Click on this message it brings up a blank page with only a number "541" on the top left hand side and nothing else. It seems it has something to do with the "P16F877.INC" File which is Included in the code on top. Below is part of the compiled messages. Should I pursue this and is there a fix for it?
Thanks.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 89 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 94 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 95 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 97 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 99 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 101 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[310] G:\MICROCHIP\MPLAB IDE\MPASM SUITE\P16F877.INC 1006 : Superseding current maximum RAM and RAM map.
Message[305] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 277 : Using default destination of 1 (file).
Message[305] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 279 : Using default destination of 1 (file).
Message[305] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 281 : Using default destination of 1 (file).
Executing: "G:\Microchip\MPLAB IDE\MPASM Suite\mplink.exe" /p16F877 "..
MPLINK 4.49, Linker
Device Database Version 1.14
Copyright (c) 1998-2011 Microchip Technology Inc.
Errors : 0
I am hopping someone can help me with figuring out if this is a real issues or not "1006 : Superseding current maximum RAM and RAM map.". This is what I see after I compile and when I double Click on this message it brings up a blank page with only a number "541" on the top left hand side and nothing else. It seems it has something to do with the "P16F877.INC" File which is Included in the code on top. Below is part of the compiled messages. Should I pursue this and is there a fix for it?
Thanks.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 89 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 94 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 95 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 97 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 99 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[302] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 101 : Register in operand not in bank 0. Ensure that bank bits are correct.
Message[310] G:\MICROCHIP\MPLAB IDE\MPASM SUITE\P16F877.INC 1006 : Superseding current maximum RAM and RAM map.
Message[305] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 277 : Using default destination of 1 (file).
Message[305] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 279 : Using default destination of 1 (file).
Message[305] G:\MYPROJECT\MPLAB\I2CSONAR16C74A\XDCR.ASM 281 : Using default destination of 1 (file).
Executing: "G:\Microchip\MPLAB IDE\MPASM Suite\mplink.exe" /p16F877 "..
MPLINK 4.49, Linker
Device Database Version 1.14
Copyright (c) 1998-2011 Microchip Technology Inc.
Errors : 0