hello, the led light stays on, when I start the treadmill, after restarting a few times, the red led blinks, but the treadmill does not start, when warming up with a hair dryer, the circuit board works. circuit board pictures, can someone help, live in Belgium.

 

Appears to be a lot of corrosion or other contaminating matter!! ?

 

Appears to be a lot of corrosion or other contaminating matter!! ?

indeed, was in a shed, damp, repair will probably be expensive?

 

There is a reverse-engineered copy of the schematic here if a search is done.
Could be dipped in a alchohol wash etc to clean it?

 

There is a reverse-engineered copy of the schematic here if a search is done.
Could be dipped in a alchohol wash etc to clean it?

Proform 500 zlt ,same circuit board?

 

There are some component variations, but essentially they all achieve the same thing, just a different circuit method.

 

proform 720 and 500 will have the same circuit board, motherboard?

 

I was talking about the MC2100 versions

 

What controller??

 

MC2100ELS-18W

 

hola, la luz led permanece encendida, cuando enciendo la cinta de correr, después de reiniciar varias veces, el led rojo parpadea, pero la cinta de correr no arranca, al calentar con un secador de pelo, la placa de circuito funciona. imágenes de la placa de circuito, ¿alguien puede ayudar, vive en Bélgica?
[/CITA]
Posiblemente sea el transistor que lleva el radiador. ¿Se calienta?

 

Possibly it is the transistor that has the radiator. Does it get hot?

19 months ago, so hopefully the problem has been solved.