Working with some Kemet EC2-5TNU double coil latching relays and trying to get it to work with a SPST momentary switch.
I found an older article (here) with an example of how to implement this, but I am working with 5v not 12v.
What is the math involved here to determine the correct resistor, capacitor and diode values?
I have never had to dive this deep into circuitry before.
Not looking for direct answer, willing to learn, just don't know where to start for something like this.
Thanks
I found an older article (here) with an example of how to implement this, but I am working with 5v not 12v.
What is the math involved here to determine the correct resistor, capacitor and diode values?
I have never had to dive this deep into circuitry before.
Not looking for direct answer, willing to learn, just don't know where to start for something like this.
Thanks