Hi all
I am following Deve's design on a low fuel light for my classic mini utilising the existing fuel sender and gauge. I have attached his design however his design is based around a fuel sender that registers 30 ohms when full and 0 ohms when empty.
On the classic mini the sender registers approx 270 ohms when empty and 30 ohms when full. Also there is a voltage stabiliser between the 12V source and the gauge which regulates the voltage at a constant 10 volts.
What changes would I need to make to Deve's design for my application.
I am following Deve's design on a low fuel light for my classic mini utilising the existing fuel sender and gauge. I have attached his design however his design is based around a fuel sender that registers 30 ohms when full and 0 ohms when empty.
On the classic mini the sender registers approx 270 ohms when empty and 30 ohms when full. Also there is a voltage stabiliser between the 12V source and the gauge which regulates the voltage at a constant 10 volts.
What changes would I need to make to Deve's design for my application.
Attachments
-
101.6 KB Views: 34