Sure.

The attached zip file includes a test circuit sim.
I used a UniversalOpamp2 for the level shifter on the sim. but for the bench test, I used an LM358.

Have fun...

Hi @eetech00 I know this is an old post but if you still have the ACS72310AB model at hand, I would appreciate a copy. Cheers

PS moderators sorry if this is not the right way of doing things

Mod: Link to old Thread.
https://forum.allaboutcircuits.com/threads/looking-for-a-spice-model.125760/post-1025219

 

Hi @eetech00 I know this is an old post but if you still have the ACS72310AB model at hand, I would appreciate a copy. Cheers

PS moderators sorry if this is not the right way of doing things

Mod: Link to old Thread.
https://forum.allaboutcircuits.com/threads/looking-for-a-spice-model.125760/post-1025219

Hi
Can you not download from the link you’ve posted?

if not, I will upload a copy.

eT

 

Hi et, Thanks for getting back on this. I run your test jig and was under the (wrought) impression it was only the AU model you had posted. I opened your ACS723xx.txt and noted you have a model for the 40A AB model. I created a sysmbol for this and tested with alternating input and it works just fine. Thanks for your help.
Cheers Bill, Australia