Hello, I am getting ready to start a 0-30/32v regulated PSU using a single LM338T. I have been browsing/searching for a good circuit with this chip. It seems that most of the schematics that I have found use 24-25v input. I was hoping to use somewhere around a 34-36v input. Does anyone have a good schematic with 30-32v output? As of now I am leaning toward the one on the data-sheet.
Also, most of the circuits that I have found use a 4700-10,000uf cap for a filter. I have a vary large Mallory 8000mfd 40vdc (max surge 45vdc) aluminum electrolytic capacitor that I would like to use. It says "computer grade". Any suggestions would be greatly appreciated!
Also, most of the circuits that I have found use a 4700-10,000uf cap for a filter. I have a vary large Mallory 8000mfd 40vdc (max surge 45vdc) aluminum electrolytic capacitor that I would like to use. It says "computer grade". Any suggestions would be greatly appreciated!