Hello,
This is my first time using the LM2903 Dual Comparator. I am designing a circuit for a school project and wanted some input on the circuit.
The circuit takes a voltage signal and compares it to two reference voltages (high and low threshold). I was reading about the LM2903; however, I am not that comfortable with dual comparators.
My goal for the comparator is to take the input bus voltage and compare that voltage with a high and low reference voltage. If it passes then the OpAmp would release a 1 fail is a 0.
ALL ADVICE/CRITICISM IS WELCOMED. I am an Electrical Engineering student, always willing to learn.
This is my first time using the LM2903 Dual Comparator. I am designing a circuit for a school project and wanted some input on the circuit.
The circuit takes a voltage signal and compares it to two reference voltages (high and low threshold). I was reading about the LM2903; however, I am not that comfortable with dual comparators.
My goal for the comparator is to take the input bus voltage and compare that voltage with a high and low reference voltage. If it passes then the OpAmp would release a 1 fail is a 0.
ALL ADVICE/CRITICISM IS WELCOMED. I am an Electrical Engineering student, always willing to learn.