LCD Graphic 128x64

Dear friends,
I would like to know the problem of my program with AT89c52 with lcd graphic 128x64?I'm currently i'm using protes 7.1 sp4(you can see diagram picture @picture1(http://www.4shared.com/photo/NtYeM_OX/capture_proteus_lcd128x64.html)

Problem : see at picture2(http://www.4shared.com/photo/ZnErIgSG/simulation_eror_proteus_lcd128.html) and have trouble "PARAMETER <INVERT> not defined in INVERT of U1 and

listing program :
;inisialisasi LCD
DaTA_LCD equ p2

ENABLE BIT P0.7
DI BIT P0.5

CS1 BIT P0.6
CS2 BIT P0.4

RES BIT P0.3
RW BIT P0.2

LCD1: CLR CS2
SETB CS1
CLR DI
CLR RW
SETB ENABLE
MOV DATA_LCD,#3FH
CLR ENABLE
CALL CEK_LCD
RET

LCD2: CLR CS1
SETB CS2
CLR DI
CLR RW
SETB ENABLE
MOV DATA_LCD,#3FH
CLR ENABLE
CALL CEK_LCD
RET

SET_COLUMN0:
CLR DI
CLR RW
MOV DATA_LCD,#01000000B
SETB ENABLE
CLR ENABLE
CALL CEK_LCD
RET

SET_PAGE0:
CLR DI
CLR RW
MOV DATA_LCD,#10111000B
SETB ENABLE
CLR ENABLE
CALL CEK_LCD
RET

TULIS: SETB DI
CLR RW
SETB ENABLE
CLR ENABLE
RET

CEK_LCD:
CLR ENABLE
CLR DI
SETB RW
SETB ENABLE
JB P2.7,CEK_LCD
CLR ENABLE
RET

RESET:
CLR ENABLE
CLR RES
SETB RES
RET

STATUS_WRITE:
CLR ENABLE
SETB DI
CLR RW
SETB ENABLE
CLR ENABLE
RET

STATUS_READ:
CLR ENABLE
CLR DI
SETB RW
SETB ENABLE
CLR ENABLE
RET

STATUS_LINE:
CALL INIT
SETB ENABLE
MOV DATA_LCD,#11000000B
CLR ENABLE
RET


Please help....