Hey can someone help me with an assembly and maybe code. I want to control the brushless motor with the joy stick. I’ve tried but wasn’t successful so I’m starting over with someone else's input. The materials that I’m using are attached.

 

My crystal ball is broken. I have no idea what the majority of components are in your picture. You’d get better responses if you describe each one in a post. Otherwise there’s insufficient data to be able to help you.

 

Hey can someone help me with an assembly and maybe code. I want to control the brushless motor with the joy stick. I’ve tried but wasn’t successful so I’m starting over with someone else's input. The materials that I’m using are attached.

In case you can't view the materials, I'm using:

1. A2212/13T 1000KV brushless motor
2. Arduino Uno
3. 2200 mAh Li-po battery(3S1P 11.1V)
4. Arduino nano on breadboard
5. 30A ESC
6. 2 nRF24L01 modules
7. 1 joystick
8. 1 9V battery
9. Power Supply module

 

Here is a link to a page that explains how to use the nRF24L01 communication modules with Arduino. It includes sample code for both transmitting and receiving. All you need to do is add the output form your joystick (re-scaled to 0-100) to the transmitter code, and put the received signal on to a PWM digital output pin the drive the ESC.

Getting Started with NRF24L01 Transceiver: Arduino Guide - Latest Open Tech From Seeed (seeedstudio.com)