Hello,
I have an Edecoa DPM30 Inverter with a R1 blown. Trying to find a Board Layout for the Resistor value. Does anyone have that answer? We appreciate it.
On Budget Electronic Service
Gary Couch

 

I have an Edecoa DPM30 Inverter with a R1 blown.

Since this thread is two years old AND since your inverter has nothing to do with the inverter in this thread, you might want to consider starting a new thread with the appropriate topic.

^^^ Helpful hint for new and old users ^^^

 

I have repaired a couple of these and all 8 of the N Fets will be trashed so you need to replace all 8 of them and the gate resistors.