How to change frequency of HALL signal

Thread Starter

sl33k3r

Joined Apr 25, 2012
9
Hello, I need a device to detect a signal from a HALL sensor then change (adjustable) the frequency plus or minus up to at least 15%.

It would need to determine and store frequency of input, add/subtract timing offset to obtain required output frequency, store output frequency, then output that frequency until the input frequency changes.

That is generally what happens. I know there should be some more conditional statements, but that is a simple example.

Where would I start? (Besides a college electronic course)

Thank you
 

wayneh

Joined Sep 9, 2010
18,183
A kludge solution: Use two circuits, a frequency to voltage converter followed by a VCO voltage controlled oscillator. Not elegant but it would give you a wide range of control. And both basic circuits are easy to find for the 555 timer IC.
 

THE_RB

Joined Feb 11, 2008
5,438
Google for "speedo recalibrator". They do exactly what you need, there are a few proven commercial products in the $90 to $100 range.
 
Top