Hello,

What are the specifications for "powerfull" and "frequency"?

Bertus

Anyway, I call this NOT high frequency.
In my opinion anything above 1 MHz is high frequency.

 

Delete Powerful
Frequency amplifier circuit
My means of powerful is strong or very good circuit

 

Hello,

What do you mean with "frequency boosting"?
Do you want the frequency to change?

Bertus

 

No frequency must be fixed

 

many thanks of all.it works
now output vp-p is 12v
and
if i want to give boost to my frequency
now how i can???

There's a frequency doubler trick you can do with some XOR gates - cascade as many as needed for multiples of 2.

A bit more complex is the PLL - You use a phase comparator to compare Fin with that of a VCO - The VCO is controlled by an error voltage via a LPF from the phase comparator.

In its raw form it locks the VCO to Fin, but if you pass the VCO through a digital divider before feeding it back to the phase comparator - then the VCO has to run at <divide ratio> times Fin to keep up.

 

Hello,

What is your intention with the amplified signal?
What are trying to drive with it?

Bertus

 

Hi ian
Thanks
I think your way is complex
You can give me a circuit?

 

Hello,

What is your intention with the amplified signal?
What are trying to drive with it?

Bertus

hello,
my intention is: just amplified signal

 

Hi ian
Thanks
I think your way is complex
You can give me a circuit?

https://www.google.co.uk/search?q=p...3d7QaizIGQCw&ved=0CEsQ9QEwBg&biw=1280&bih=863

 

Hello,

If you only want to amplify the signal, you could use an 7406 TTL chip.
That has an open collector output wich can be pulled up to 30 Volts and can sink 30 mA.

Bertus